We supply and install roof-to-fence blinds in Perth for residential homes.
Roof-to-fence blinds are fixed overhead systems that run from the house or patio roof out to a boundary fence. They provide shade and weather protection along the side of the home or between structures.
All systems are custom-made and installed to suit the layout of the property. We use materials suited to Perth conditions, including strong UV, coastal wind, salt air, and seasonal rain.
Roof-to-Fence Blinds for Perth Homes
Roof-to-fence blinds are used to shelter the space between a house and a fence, or between a patio and a boundary fence.
These systems are usually angled from the roof line down to the fence line, acting like a retractable roof. They let you move between areas of your home without being exposed to direct sun or rain.
Where are Roof-to-Fence Blinds Installed?
Roof-to-fence blinds are typically installed in places that don’t suit standard awnings. The most common use is along the side of the home, where there’s a narrow gap between the wall and the boundary fence.
These areas are often used as access paths but are fully exposed to sun and rain. Roof-to-fence systems give you protection from the elements without requiring any construction.
They can also be used to extend an existing patio. If a patio roof stops short of the fence line, a roof-to-fence blind can bridge that gap without serious modifications to the structure.
Additionally, roof-to-fence blinds shield the side of your home by stopping direct sunlight before it hits the wall and windows. This limits the solar gain in your house and can significantly lower your AC costs.
Our roof-to-fence blinds can:
Our Roof-to-Fence Blinds
Roof-to-fence blinds are retractable systems that span from the roof line down to the fence. The angle and length of the blind are based on the distance and the height difference between your home’s roof and your fence.
Most of the time, the roof is higher than the fence. This means the blind is on an angle to allow for water runoff.
Materials and Hardware
We supply blinds using materials that are designed to be exposed to the elements day after day. Our roof-to-fence blinds use Vistaweave mesh.
If you opt for a mesh blind, we recommend choosing a tightly woven mesh that will give you superior rain protection. All systems are installed with durable hardware, including powder-coated aluminium fixings.
SRS Blinds
SRS Blinds are our premium roof-to-fence option, built tough for Perth’s harsh weather. The reinforced track system handles strong winds and heavy rain without warping or sagging.
Choose manual operation for simple everyday use, or upgrade to motorised for effortless control at the touch of a button. Ideal for larger spans and exposed outdoor areas where durability matters most.
Budget Blinds
Budget Blinds offer a smart, cost-effective way to enclose your outdoor space without compromising on quality. Perfect for sheltered patios and smaller spans where extreme weather exposure is less of a concern. A great entry-level choice for Perth homeowners wanting comfort and privacy on a budget.
Our Installation Process
We manage every project from start to finish, including an on-site assessment, measurement, and installation.
Site Visit & Quote
We start with a site visit to assess the distance between the roof and fence, along with the height and angle required. We check mounting points on both the house and fence to determine how the system will be supported.
The amount of exposure to sun, wind, and rain is also evaluated so we can make the best recommendations. You will receive a quote based on the measurements and your chosen materials.
Measurements & Product Selection
Once you are ready to proceed, we measure the gap precisely to confirm the blind’s dimensions and prevent sagging.
We will finalise the material choice with you and confirm how the system will be fixed at both ends.
Installation
Installation is completed using methods and hardware suited to both the house and the fence. Brackets and supports are positioned and secured at both ends of the blind.
The material is then fitted and tensioned so it maintains its shape across the full length and width of the blind.
Final Check
Once installed, we check the system a final time to make sure it’s secure and aligned correctly at every point. We make sure the blind looks and works exactly like it’s supposed to before we pack up.
Why Choose One Stop Outdoor Blinds
Our team is made up of trade-led builders who bring local experience to every patio blind installation.
- Perth-proof patio blinds: We only work with materials that we know can stand up to intense sun, wind, and salt air.
- Builder-led installation: Most installers just screw into whatever material is there. We make sure the hardware and install method are actually right for your structure’s masonry or timber.
- Made-to-measure install: We don’t try to make “standard” sizes work. Everything is measured to the millimetre on-site and fitted to your patio’s layout.
- Reliable turnaround times: We’re tradies who show up and do the work when we say we’re going to.
- Backed by our workmanship guarantee: If something’s not right after installation, we come back and sort it.
At One Stop Outdoor Blinds, we do more than install blinds that look good. Our patio blinds are sourced and installed to last.